600W 10A DC-DC Boost Converter Adjustable 10A Step Up Aluminium

Module name: 600W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: DC10V-60V Input current: 10 (MAX) Static operating current: 10mA (12V liters 20V, the higher the output voltage will be too much static too much) Output voltage: 12-60V continuously adjustable (default output 19V shipping, for other voltage please note to the treasurer.) Output current: 10A MAX more than 6A please strengthen the heat (with the input and output pressure, the greater the difference in output current smaller) Constant current range: 0.2-10A Output power: = input voltage * 10A, such as: input 12V * 10A = 120W input 24V * 10A = 240W input 36V * 10A = 360W input 60V * 10A = 600W Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: 92% -96% (efficiency and input, output voltage, current, pressure related) Input reverse connection protection: no (note positive and negative do not reverse) Installation: 4 3mm screw holes Wiring method: wiring output Module size: length 85mm wide and 52mm high 21mm First, the output voltage regulation: 1, adjust the CV-ADJ potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Clockwise voltage is small, counterclockwise adjustable First, the output current regulation: 2, clockwise CC-ADJ potentiometer about 20 laps, the output current is set to a minimum, connected to the LED, CC-ADJ potentiometer to the required current. For battery charging, put the battery after the end of the power, then receive the output, adjust the CC-ADJ to the current you need, (for charging must be used when the battery is fully charged, because the battery left The more charge, the smaller the charge current. Note: Please do not use the short circuit to adjust the current, the boost module circuit structure can not be short-c